How does the kraft gummed paper tape stored?

The storage of kraft paper gummed tape has always been an important issue. Baijin gummed tape manufacturer will introduce how to store kraft gummed tape.

From the perspective of cost, no matter which manufacturer wants to produce materials ready to use, the inventory can be reduced to zero, but from the actual operating situation, this goal cannot be fully achieved, and only the inventory can be reduced as much as possible. The inventory cycle.

Therefore, the storage of raw materials is inevitable. Because the kraft paper tape itself is greatly affected by the external environment, and the subsequent processing will be affected after the change, the storage of the raw paper should be paid attention to by the carton factory and dealers. , Otherwise the loss is immeasurable.

The storage of kraft gummed paper tape should pay attention to the following issues: try not to store the raw paper in the open air. If it is unavoidable, the open air time cannot be too long. At the same time, it needs to be covered with canvas and moved to the warehouse for storage in time to avoid rain.

The base paper is very sensitive to the humidity of the air, and it is easy to absorb or lose moisture, causing problems such as ruffles, inaccurate overprinting and wrinkles during printing. Therefore, you should choose a clean and dry environment to store the base paper. When the base paper is stacked, it should not be stacked close to the wall. The relative humidity of the warehouse and workshop where the base paper is stored is best maintained at 50%-65%.

Kraft paper tape contains lignin and many other chemical components, which will fade and turn yellow after being exposed to light, making it unusable and scrapped. At the same time, the moisture in the base paper will evaporate after exposure to the sun, the moisture content will change, the base paper will become brittle or deformed, and it cannot be printed on the machine in severe cases.

The stacking height of the base paper should not be too high to prevent crushing the underlying base paper. If it is a roll paper, avoid damage to the paper core tube. At the same time, the stacking is too high to cause collapse problems, causing Zhiping to be broken or accidents at work. Generally, the stack height should not exceed five meters. The temperature of the warehouse and workshop where the base paper is stored is best at 12-25 degrees Celsius. Excessively high temperature when storing the base paper will cause the strength of the base paper to decrease significantly.